Review on Layered Manganese-Based Metal Oxides Cathode Materials for Potassium-Ion Batteries: From Preparation to Modification.

Potassium-ion battery is rich in resources and cheap in price, in the era of lithium-ion battery commercialization, potassium-ion battery is the most likely to replace it. Based on the classification and summary of electrode materials for potassium-ion batteries, this paper focuses on the introduction of manganese-based oxide KxMnO2. The layered KxMnO2 has a large layer spacing and can be embedded with large size potassium-ions. This paper focuses on the preparation and doping of manganese-based cathode materials for potassium-ion batteries, summarizes the main challenges of KxMnO2-based cathode materials in the current stage of research and further looks into its future development direction.

Ethylene signaling modulates air humidity responses in plants.

Air humidity significantly impacts plant physiology. However, the upstream elements that mediate humidity sensing and adaptive responses in plants remain largely unexplored. In this study, we define high humidity-induced cellular features of Arabidopsis plants and take a quantitative phosphoproteomics approach to obtain a high humidity-responsive landscape of membrane proteins, which we reason are likely the early checkpoints of humidity signaling. We found that a brief high humidity exposure (i.e., 0.5 h) is sufficient to trigger extensive changes in membrane protein abundance and phosphorylation. Enrichment analysis of differentially regulated proteins reveals high humidity-sensitive processes such as 'transmembrane transport', 'response to abscisic acid', and 'stomatal movement'. We further performed a targeted screen of mutants, in which high humidity-responsive pathways/proteins are disabled, to uncover genes mediating high humidity sensitivity. Interestingly, ethylene pathway mutants (i.e., ein2 and ein3eil1) display a range of altered responses, including hyponasty, reactive oxygen species level, and responsive gene expression, to high humidity. Furthermore, we observed a rapid induction of ethylene biosynthesis genes and ethylene evolution after high humidity treatment. Our study sheds light on the potential early signaling events in humidity perception, a fundamental but understudied question in plant biology, and reveals ethylene as a key modulator of high humidity responses in plants.

Design and Finite Element Simulation of a Novel 3D-CMUT Device for Simultaneous Sensing of In-Plane and Out-of-Plane Displacements of Ultrasonic Guided Waves.

In this study, we introduce a physical model of a three-dimensional (3D) guided wave sensor called 3D-CMUT, which is based on capacitive micro-machined ultrasonic transducers (CMUTs). This 3D-CMUT sensor is designed to effectively and simultaneously obtain 3D vibration information about ultrasonic guided waves in the out-of-plane (z-direction) and in-plane (x and y-directions). The basic unit of the 3D-CMUT is much smaller than the wavelength of the guided waves and consists of two orthogonal comb-like CMUT cells and one piston-type CMUT cell. These cells are used to sense displacement signals in the x, y, and z-directions. To ensure proper functioning of the 3D-CMUT unit, the resonant frequencies of the three composed cells are set to be identical by adjusting the microstructural parameters appropriately. Moreover, the same sensitivity in the x, y, and z-directions is theoretically achieved by tuning the amplification parameters in the external circuit. We establish a transient analysis model of the 3D-CMUT using COMSOL finite element simulation software to confirm its ability to sense multimode ultrasonic guided waves, including A0, S0, and SH0 modes. Additionally, we simulate the ball drop impact acoustic emission signal on a plate to demonstrate that the 3D-CMUT can not only utilize in-plane information for positioning but also out-of-plane information. The proposed 3D-CMUT holds significant potential for applications in the field of structural health monitoring (SHM).

High air humidity dampens salicylic acid pathway and NPR1 function to promote plant disease.

The occurrence of plant disease is determined by interactions among host, pathogen, and environment. Air humidity shapes various aspects of plant physiology and high humidity has long been known to promote numerous phyllosphere diseases. However, the molecular basis of how high humidity interferes with plant immunity to favor disease has remained elusive. Here we show that high humidity is associated with an "immuno-compromised" status in Arabidopsis plants. Furthermore, accumulation and signaling of salicylic acid (SA), an important defense hormone, are significantly inhibited under high humidity. NPR1, an SA receptor and central transcriptional co-activator of SA-responsive genes, is less ubiquitinated and displays a lower promoter binding affinity under high humidity. The cellular ubiquitination machinery, particularly the Cullin 3-based E3 ubiquitin ligase mediating NPR1 protein ubiquitination, is downregulated under high humidity. Importantly, under low humidity the Cullin 3a/b mutant plants phenocopy the low SA gene expression and disease susceptibility that is normally observed under high humidity. Our study uncovers a mechanism by which high humidity dampens a major plant defense pathway and provides new insights into the long-observed air humidity influence on diseases.

Real-World Safety and Effectiveness of Omalizumab in Moderate to Severe Allergic Asthma Patients in China: A Post-Authorization Study.

Purpose: Omalizumab was first approved in China in 2017 for the treatment of moderate to severe allergic asthma for adult and adolescent patients aged ≥12 years. In accordance with the Chinese Health Authority requirement, the post-authorization safety study (PASS) was conducted to evaluate the safety and effectiveness of omalizumab in a real-world setting in patients with moderate to severe allergic asthma in China over a 24-week observation period. Patients and Methods: This is a single-arm, non-interventional, multicenter, PASS conducted in adult, adolescent, and pediatric patients (≥6 years old) with moderate to severe allergic asthma receiving omalizumab in a real-world clinical setting from 2020 to 2021 in 59 sites of mainland China. Results: In total, 1546 patients were screened and 1528 were enrolled. They were stratified according to age (6 to <12 years [n = 191]; ≥12 years [n = 1336]; unknown [n = 1]). Among the overall population, 23.6% and 4.5% of patients reported adverse events (AEs) and serious adverse events (SAEs), respectively. Among pediatric patients (6 to <12 years), 14.1% and 1.6% patients reported AEs and SAEs, respectively. AEs that led to treatment discontinuation in both age groups were <2%. No new safety signals were reported. Effectiveness results showed improvement in lung function, asthma control, and quality of life (QoL). Conclusion: The findings of the current study demonstrated that the safety profile of omalizumab was consistent with its known profile in allergic asthma, and no new safety signals were reported. Omalizumab treatment was effective in improving the lung function and QoL in patients with allergic asthma.

Environmental and sensitization variations among asthma and/or rhinitis patients between 2008 and 2018 in China.

BACKGROUND: Little is known about the changes in allergen sensitization in China secondary to the environmental variations over the past decade. We aimed at investigating the variations in sensitization among asthma and/or rhinitis patients in China between 2008 and 2018. METHODS: This study analyzed cross-sectional data from national surveys conducted in China in 2008 and 2018. After finishing the questionnaire, participants underwent serum specific IgE measurements. A total of 2322 and 2798 patients were enrolled in 2008 and 2018, respectively. The significance of differences in sensitization rates among four regions of China were assessed. Correlation analysis was used to identify the associations of sensitization with climate change and planting of Artemisia desertorum between the two surveys. RESULTS: Compared with 2008, the general sensitization rate to mites significantly increased in 2018, which ranked highest among all tested allergens. Sensitization to pollens, especially Artemisia vulgaris, showed the greatest increase in the north. The annual mean temperature, rainfall and relative humidity in all four regions, and the Artemisia desertorum coverage in the northeastern area, increased significantly in 2018 as compared with 2008. From 2008 to 2018, an increase in Dermatophagoides pteronyssinus sensitization was significantly associated with an increase in relative humidity (r = 0.54, p = 0.037). The increase in A. vulgaris sensitization was significantly associated with the increase in the A. desertorum planting area (r = 0.67, p = 0.006) and with a decrease in rainfall (r = -0.59, p = 0.021). CONCLUSIONS: House dust mites remain the most important allergen in Chinese individuals with asthma and/or rhinitis. Pollen sensitization dramatically increased in northern China. Increases in sensitization to dust mites and Artemisia were related to the increases in humidity and planting area of A. desertorum.

Expert consensus on the use of omalizumab in chronic urticaria in China.

Chronic urticaria (CU) is a debilitating skin disease that lasts for more than 6 weeks with wheals and/or angioedema, including chronic spontaneous urticaria (CSU) and chronic inducible urticaria (CIndU). In China, the prevalence of this disease is high, more than 1%, and on the rise. CU has a major impact on the quality of life (QoL) of patients who frequently experience sleep disturbance, depression, and anxiety. Nearly one-third of patients with CSU, in China, are resistant to second-generation H1-antihistamines (sgAHs), even at a fourfold dose (second line; off-label). Omalizumab is approved for the treatment of CSU treatment in Europe and shows remarkable efficacy and safety. In China, regulatory approval for the use of omalizumab is pending, and its use in clinical practice varies widely. Consensus on omalizumab CU treatment in China is urgently needed. The aim of this article is to propose a practical omalizumab treatment algorithm for the management of antihistamine-resistant CSU and CIndU in adults and special population including children and adolescents, and pregnant or breast feeding women, to guide daily clinical practice in China. In the development of this consensus, an expert group including mainly dermatologists, allergists, but also pulmonologists, ENTs, immunologists, and pediatricians in Allergic Disease Prevention and Control Committee, Chinese Preventive Medicine Association, reviewed the existing evidence and developed consensus on the use of omalizumab in CU patients from China. The goal of this consensus is to assist clinicians in making rational decisions in the management of refractory CU with omalizumab. The key clinical questions covered by the treatment algorithm are: 1) Omalizumab treatment routine strategy in both CSU and CIndU patients; 2) Recommended dose and treatment duration for different age stratification; 3) Treatment duration for CU patients with other allergic comorbidities; 4) Recommendation on omalizumab stopping strategy.

The IgE Blocking Activity Induced by Dermatophagoides pteronyssinus Subcutaneous Immunotherapy Does Not Correlate with Specific IgA but with IgG4 in both Serum and Saliva.

BACKGROUND: The role of salivary-specific IgG4 and IgA in subcutaneous immunotherapy (SCIT) is not well defined. We aimed to investigate the change of IgG4 and IgA in both serum and saliva and their correlations with IgE-blocking-factor (IgE-BF) during SCIT. METHOD: 307 Dermatophagoides pteronyssinus (DP) allergic rhinitis and/or asthma patients were recruited for this study. 286 patients received DP-SCIT for 1 year. Twenty-one patients received only symptomatic treatment. DP-, Der p 1-, and Der p 2-specific IgE in serum, specific-IgG4 and Der p 2-specific IgA1 and IgA2 in both serum and saliva were measured at timepoints 0, 4, and 12 months during DP-SCIT. Correlation between salivary and serological IgG4, IgA, and their correlation with DP-specific IgE-BF measured in serum was evaluated. RESULTS: During DP-SCIT, the allergen-specific IgG4 in both saliva and serum increased and correlated significantly, the correlation becomes stronger over the treatment time. DP-specific IgE-BF significantly correlated with DP-specific IgG4 in serum (p < 0.0001) at different timepoints and in saliva at 12 months of SCIT (p < 0.01). No change in Der p 2-specific IgA during DP-SCIT was observed, and the IgA in serum did not correlate with IgA in saliva. There was no correlation between DP IgE-BF and Der p 2-specific IgA in serum or saliva. The control group did not exhibit significant changes in any antibody level measured. CONCLUSION: The IgE blocking activity induced by DP-SCIT treatment correlated with specific IgG4 and not IgA. The IgG4 in saliva correlates with serum IgG4 and can be an alternative immunological marker beyond 1 year of SCIT treatment.

Highly Deep Ultraviolet-Transparent h-BN Film Deposited on an Al0.7Ga0.3N Template by Low-Temperature Radio-Frequency Sputtering.

Hexagonal boron nitride (h-BN) is an attractive wide-bandgap material for application to emitters and detectors operating in the deep ultraviolet (DUV) spectral region. The optical transmittance of h-BN in the DUV region is particularly important for these devices. We report on the deposition of thick h-BN films (>200 nm) on Al0.7Ga0.3N templates via radio-frequency sputtering, along with the realization of ultrahigh transmittance in the DUV region. The fraction of the gas mixture (Ar/N2) was varied to investigate its effects on the optical transmittance of BN. DUV light transmittance of as high as 94% was achieved at 265 nm. This value could be further enhanced to exceed 98% by a post-annealing treatment at 800 °C in a N2 ambient for 20 min. The phase of the highly DUV-transparent BN film was determined to be a purely hexagonal structure via Raman spectra measurements. More importantly, these deposition processes were performed at a low temperature (300 °C), which can provide protection from device performance degradation when applied to actual devices.

Identification and expression pattern analysis of BoMYB51 involved in indolic glucosinolate biosynthesis from broccoli (Brassica oleracea var. italica).

Glucosinolates are a class of amino acid-derived specialized metabolites characteristic of the Brassicales order. Trp derived indolic glucosinolates are essential for the effective plant defense responses to a wide range of pathogens and herbivores. In Arabidopsis, MYB51 is the key transcription factor positively regulates indolic glucosinolate production by activating certain biosynthetic genes. In this study, we report the isolation and identification of a MYB51 from broccoli designated as BoMYB51. Overexpression of BoMYB51 in Arabidopsis increased indolic glucosinolate production by upregulating biosynthetic genes and resulted in enhanced flagellin22 (Flg22) induced callose deposition. The spatial expression pattern and responsive expression of BoMYB51 to several hormones and stress treatments were investigated by expressing the ß-glucuronidase (GUS) reporter gene driven by BoMYB51 promotor in Arabidopsis and quantitative real-time PCR analysis in broccoli. Our study provides information on molecular characteristics of BoMYB51 and possible physiological process BoMYB51 may involve.

Self-reported questionnaire survey on the prevalence and symptoms of adverse food reactions in patients with chronic inhalant diseases in Tangshan city, China.

BACKGROUND: The prevalence of adverse food reactions in patients with chronic inhalant diseases has seldom been studied in China. This study is to investigate the prevalence of adverse food reactions and the symptoms caused in respiratory patients. METHODS: Respiratory patients in allergy clinics were asked to complete a questionnaire. Patients' information such as age, gender, family history of allergy, and adverse reactions to a list of 48 foods and the symptoms caused, was recorded. Multivariate analyses were performed to determine the prevalence of adverse food reactions and their associated symptoms. RESULTS: 459 subjects, with an average age of 32 years old, completed the questionnaire; 45.3% were male. Among the 459 subjects, 38.1% (175/459) had an adverse reaction to food: 13.6% had an adverse food reaction to crab, 12.4% had an adverse food reaction to shrimp; and 9.9% had an adverse reaction to shellfish. Peach and nectarine were also shown to be common causative foods with 6.8% of the study group showing an adverse reaction to peach and 5.2% to nectarine. Seafood mainly caused skin symptoms and fruits gave rise to more throat, oral, and gastrointestinal problems. CONCLUSION: The prevalence of adverse food reactions is high for patients with respiratory diseases. This indicates that adverse food reactions should be considered in the treatment and management of patients with chronic inhalant diseases.

Electrical determination of current injection and internal quantum efficiencies in AlGaN-based deep-ultraviolet light-emitting diodes.

We propose a method to determine the current injection efficiency (CIE) and internal quantum efficiency (IQE) of light-emitting diodes (LEDs) during current injection. The method is based on fourth-order polynomial fitting of a modified rate equation to electroluminescence data. Our method can extract the CIE at low injection current densities, unlike conventional methods that generally assume the CIE to be unity. We apply the method to AlGaN-based deep-ultraviolet LEDs. Results show that the CIE was only approximately 51% at low injection current densities and was almost independent of injection current density up to 100 A/cm2. The peak IQE was 77%.

High correlation of specific IgE sensitization between birch pollen, soy and apple allergens indicates pollen-food allergy syndrome among birch pollen allergic patients in northern China.

BACKGROUND: Birch pollen sensitization and associated pollen-food syndrome among Chinese allergic patients have not been investigated. METHODS: Sera from 203 allergic patients from the northern part of China and collected during February to July 2014 were investigated. Specific immunoglobulin E (IgE) against birch pollen extract Bet v and major birch pollen allergen Bet v 1 were measured using the ADVIA Centaur. The presence of major apple allergen Mal d 1 and soy bean allergen Gly m 4 specific IgE was measured by ImmunoCAP 100. RESULTS: Among the 203 sera, 34 sera (16.7%) had specific IgE to Bet v and of these, 28 sera (82.4%) contained Bet v 1-specific IgE. Among the 28 sera with Bet v 1-specific IgE, 27 sera (96.4%) contained Mal d 1-specific IgE and 22 sera (78.6%) contained Gly m 4-specific IgE. Of the 34 Bet v-positive sera, 6 sera (17.6%) contained no specific IgE for Bet v 1, Mal d 1, or Gly m 4. Almost all Bet v-positive sera were donated during the birch pollen season. CONCLUSIONS: The prevalence of birch allergy among patients visiting health care during pollen season can be as high as 16.7% in Tangshan City. The majority of Chinese birch allergic patients are IgE-sensitized to the major birch pollen allergen Bet v 1 as well as to the major apple allergen Mal d 1 and soy bean allergen Gly m 4. A relatively high number of patients (17.6%) are IgE-sensitized to birch pollen allergen(s) other than Bet v 1. The high prevalence of specific IgE to Mal d 1 and Gly m 4 among Bet v 1-sensitized patients indicates that pollen-food allergy syndrome could be of clinical relevance in China.

Enhancement of the evanescent wave coupling effect in a sub-wavelength-sized GaAs/AlGaAs ridge structure by low-refractive-index surface layers.

We have investigated the three-dimensional emission patterns of GaAs/AlGaAs ridge structures with a sub-wavelength-sized top-flat facet by angle-resolved photoluminescence (PL). We found that the integrated PL intensity, and hence the light-extraction efficiency, can be enhanced by about 34% just by covering the ridge surface with a thin SiO2 layer. A double-coupling effect of evanescent waves that occurs at both the semiconductor-SiO2 and SiO2-air interfaces is suggested to be responsible for the improvement, based on a finite-difference time-domain simulation of the electromagnetic field around the ridge top.

Prevalence of sensitization to weed pollens of Humulus scandens, Artemisia vulgaris, and Ambrosia artemisiifolia in northern China.

OBJECTIVE: Weed pollens are common sources of allergens worldwide. The prevalence of weed pollen sensitization is not yet fully known in China. The purpose of this study was to investigate the prevalence of sensitization to weed allergens from Artemisia, Ambrosia, and Humulus in northern China. METHODS: A total of 1144 subjects (aged from 5 to 68 years) visiting our clinic from June to October 2011 underwent intradermal testing using a panel of 25 allergen sources. Subjects with positive skin responses to any pollen were further tested for their serum concentrations of IgE antibodies against Artemisia vulgaris, Ambrosia artemisiifolia, and Humulus scandens, and against the purified allergens, Art v 1 and Amb a 1. RESULTS: Of 1144 subjects, 170 had positive intradermal reactions to pollen and 144 donated serum for IgE testing. The prevalence of positive intradermal responses to pollens of Artemisia sieversiana, Artemisia annua, A. artemisiifolia, and H. scandens was 11.0%, 10.2%, 3.7%, and 6.6%, respectively. Among the intradermal positive subjects, the prevalence of specific IgE antigens to A. vulgaris was 58.3%, to A. artemisiifolia 14.7%, and to H. scandens 41.0%. The prevalence of specific IgE antigens to the allergen Art v 1 was 46.9%, and to Amb a 1 was 11.2%. The correlation between the presence of IgE antibodies specific to A. vulgaris and to the Art v 1 antigen was very high. Subjects with A. artemisiifolia specific IgE also had A. vulgaris specific IgE, but with relatively high levels of A. vulgaris IgE antibodies. There were no correlations between the presence of IgE antibodies to H. scandens and A. vulgaris or to H. scandens and A. artemisiifolia. CONCLUSIONS: The intradermal prevalence of weed pollen sensitization among allergic subjects in northern China is about 13.5%. Correlations of specific IgE antibodies suggest that pollen allergens from Artemisia and Humulus are independent sources for primary sensitization.

Spin splitting modulated by uniaxial stress in InAs nanowires.

We theoretically study the electronic structure, spin splitting, effective mass, and spin orientation of InAs nanowires with cylindrical symmetry in the presence of an external electric field and uniaxial stress. Using an eight-band k·p theoretical model, we deduce a formula for the spin splitting in the system, indicating that the spin splitting under uniaxial stress is a nonlinear function of the momentum and the electric field. The spin splitting can be described by a linear Rashba model when the wavevector and the electric field are sufficiently small. Our numeric results show that the uniaxial stress can modulate the spin splitting. With the increase of wavevector, the uniaxial tensile stress first restrains and then amplifies the spin splitting of the lowest electron state compared to the no strain case. The reverse is true under a compression. Moreover, strong spin splitting can be induced by compression when the top of the valence band is close to the bottom of the conductance band, and the spin orientations of the electron stay almost unchanged before the overlap of the two bands.

[A method of dental arch auto-detection for dental plaster models].

The shape of dental arch for orthodontic diagnosis and treatment is of great significance. This paper presents an automated method for detecting the dental arch form. Firstly, 3D teeth data model is retrieved by the 3D-optical measuring system. Secondly, the occlusal plane is computed by interactively picking up four feature points. Thirdly, the feature point set is filtered by the rule and two-step curve fitting method is used to obtain the dental arch form. Finally, some examples are tested in this work and the results demonstrate that the proposed algorithm is effective and feasible.

[Computer aided design and manufacture of the porcelain fused to metal crown].

In order to satisfy the current demand for fast and high-quality prosthodontics, we have carried out a research in the fabrication process of the porcelain fused to metal crown on molar with CAD/CAM technology. Firstly, we get the data of the surface mesh on preparation teeth through a 3D-optical grating measuring system. Then, we reconstruct the 3D-model crown with the computer-aided design software which was developed by ourselves. Finally, with the 3D-model data, we produce a metallic crown on a high-speed CNC carving machine. The result has proved that the metallic crown can match the preparation teeth ideally. The fabrication process is reliable and efficient, and the restoration is precise and steady in quality.